TestEquity 3007C FastRate Temperature Chamber Environmental Chamber USED (9057)R

Description

TestEquity 3007C FastRate Temperature Chamber Environmental Chamber USED (9057)R In good cosmetic condition. Powers on, tested to temperatures -73C to 175 C. Cools and heats fast. This item was removed from a lab and the power cord was cut. See pictures for more detail. Manufacturer: TestEquity Model #/ Model: 3007C Includes: 1 Shelf Specifications: (These specifications were taken form an online user manual and may not be accurate to this product.) Temperature Range –73°C to +175°C Control Tolerance ±0.5°C (Measured at the control sensor after stabilization) Uniformity ±1.0°C (Variations throughout the chamber after stabilization) Cooling Rate, LN2 Boost and Compressors (empty chamber)* 20°C/minute from +85°C to -40°C Cooling Rate, LN2 Boost and Compressors (25 lb static aluminum load)* 13°C/minute from +85°C to -40°C Heat Up Ramp Rate (empty chamber)* 17°C/minute from -40°C to +85 °C Heat Up Ramp Rate (25 lb static aluminum load) Dimensions: Actual Dimensions: 24 W x 21 H x 24" D Outside Dimensions 33 W x 79 H x 54.25" D Actual Weight: 1,200 lbs Shipping Dimensions: ~38x84x62" Shipping Weight: ~1,350 lbs
TestEquity 3007C FastRate Temperature Chamber Environmental Chamber USED (9057)R
In good cosmetic condition. Powers on, tested to temperatures -73C to 175 C. Cools and heats rapidly. This environmental chamber was hardwired. See pictures for more detail.
Manufacturer: TestEquity
Model #/ Model: 3007C
LN2 Inlet box
Watlow E-Z Zone Limit Controller
Watlow F4 Controller
Includes:
1 Shelf
Specifications: (These specifications were taken form an online user manual and may not be accurate to this product.)
Temperature Range –73°C to +175°C
Control Tolerance ±0.5°C (Measured at the control sensor after stabilization)
Uniformity ±1.0°C (Variations throughout the chamber after stabilization)
Cooling Rate, LN2 Boost and Compressors (empty chamber)* 20°C/minute from +85°C to -40°C
Cooling Rate, LN2 Boost and Compressors (25 lb static aluminum load)* 13°C/minute from +85°C to -40°C
Heat Up Ramp Rate (empty chamber)* 17°C/minute from -40°C to +85 °C
Heat Up Ramp Rate (25 lb static aluminum load)
Power Requirements:
208/230V
35/39 A Max
3 PH
60 Hz
Dimensions:
Actual Dimensions: 24 W x 21 H x 24" D
Outside Dimensions 33 W x 79 H x 54.25" D
Actual Weight: 1,200 lbs
Shipping Dimensions: ~38x84x64"
Shipping Weight: ~1,350 lbs
*Crating Fee: Cost of Material + 0 Labor*
Sold as is with 30 day Right of Return, only pictured items included
Easy return/refund for any reason
Anacapa Equipment
RETURNS
Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service.   You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent.  We DO NOT ship internationally.  If you are using a freight forwarder then returns are VOID.
SHIPPING
All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment.  We only charge actual shipping cost.  If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost.
We DO NOT ship internationally.  IF you are using a freight forwarder then returns are VOID.
LIMITED WARRANTY
Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use.  The entire risk as to the quality and performance of the equipment is with the Buyer.  Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair.  Buyer may inspect the equipment prior to purchase and placement of the order.  Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect.  Buyer is responsible for determining the suitability of the equipment for its application.  Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased.
The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty
.
INDEMNITY
Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller.  The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws.  Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California.
Images sell!
Get Supersized Images & Free Image Hosting
Attention Sellers - Get Templates
Image Hosting, Scheduling at Auctiva.com.