R410a, Refrigerant, 5 lb. Hose, Pro-Seal Pro-Dry XL4 Leak Stop, Free Ship, Kit K

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R410a, Refrigerant, 5 lb. Hose, Pro-Seal Pro-Dry XL4 Leak Stop, Free Ship, Kit K
New!
Kit K
*Includes a MALCO pocket screwdriver that has a regular flat blade and a valve core tool
built
into the handle.
It also has a pocket clip.
Refrigerant R-410a
Top off your system with this 5 Lb. disposable can of R-410a refrigerant.
Recharging your system is super easy with this nice
convenient
5 Lb. can.
(1) CPS AD87 R410a Low-Side 5/16 Adapter
Great for new installs , Mini Split Systems, Heat Pump Systems or any other equipment usuing R410a Refrigerant.
This is what you get:
One 5 Liquid Lbs. of R410a with a 1/4" Male Flare Hose Connection.
The tank does have a on/off valve as well.
Frosty-Freeze Refrigerants, Since 1979
5 Pounds of R410a Refrigerant.
LOWEST PRICE ON EBAY!!!
Perfect for Mini-Split (Ductless) Systems & Topping Off Your Unit Without Spending A Lot Of Money.
R-410A is currently the leading HFC Refrigerant.
Meets AHRI-700 Standards
Order Today!!
It Does Not Contribute To Ozone Depletion and is therefore becoming more widely used.
We Have It Manufactured Here In The U.S.A Under Our Name Brand, Frosty-Freeze
Refrigerants
, SINCE 1979.
Factory Sealed Refrigerant can with 5 lbs. of refrigerant R410a.
Proseal XL4 Direct Inject 1.5-5 Ton Applications #2100A1-5
One of our most requested products!
Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years.
Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 with Dye travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 with Dye Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets.
Sealing leaks will save energy and lower refrigerant emissions.
Eliminate the tedious, and time consuming process of "pumping down the unit".
Simply Connect and Inject.
Enviro-Safe's ProSeal XL4 Inject is:
Concentrated
Compatible with all refrigerant, except ammonia
Compatible with all oils
No need to pump down R410, or other units
Large equipment, bulky tools, injection hoses are a thing of the past
For Use In:
heat pumps
split systems & mini split units
packaged units
microchannel coils
EASY SEAL PRO DRY XL4 Auto Direct Inject A/C Dehydration & Moisture Treatment
ProDRY XL4 Inject Part# 2105AI
Enviro-Safe&; ProDry Xl4 Inject is the very first A/C Dehydration Treatment in a direct inject device, and is the concentrated version of our 4 oz ProDry XL4 can.
ProDry XL4 Inject’s formula contains a dehydrating agent that converts the moisture in the A/C system into a synthetic oil that mixes with the oil already in the system.
Features and Benefits
•Eliminates moisture to protect the system from failure resulting from corrosion.
Moisture robs a system of cooling capacity.
•Less expensive than removing moisture through mechanical evacuation
• Easy to install
ProDry XL4 Inject works best in heat pumps, split and mini- split units, packaged units, micro channel coils, coolers, and commercial units.
*DO NOT use in ammonia systems.
Features and Benefits:Pro
ProDry XL4 Inject is the concentrated version of Enviro-Safe ProDry XL4.
ProDry XL4 Inject's formula contains a dehydrating agent that converts the moisture and air in the a/c system into a synthetic oil that mixes with the oil already in the system.
Eliminates moisture to protect the system from failure, resulting from corrosion. Moisture robs a system of cooling capacity
Treats systems up to 5 Tons
Less expensive than removing moisture through mechanical evacuation
Sealing leaks will save energy, AND lowers refrigerant emissions
Install Enviro-Safe Pro-Seal XL4 Inject after installing Enviro-Safe ProDry XL4 Inject
If the system has not leaked all the way to zero, moisture and air should not be in the system. However, when in doubt use ProDry XL4 Inject.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
New! Kit K *Includes a MALCO pocket screwdriver that has a regular flat blade and a valve core tool built into the handle. It also has a pocket clip. Refrigerant R-410a Top off your system with this 5 Lb. disposable can of R-410a refrigerant. Recharging your system is super easy with this nice convenient 5 Lb. can. (1) CPS AD87 R410a Low-Side 5/16 Adapter Great for new installs , Mini Split Systems, Heat Pump Systems or any other equipment usuing R410a Refrigerant. This is what you get: ---One 5 Liquid Lbs. of R410a with a 1/4" Male Flare Hose Connection. ---The tank does have a on/off valve as well. --- Frosty-Freeze Refrigerants, Since 1979 5 Pounds of R410a Refrigerant. LOWEST PRICE ON EBAY!!! Perfect for Mini-Split (Ductless) Systems & Topping Off Your Unit Without Spending A Lot Of Money. R-410A is currently the leading HFC Refrigerant. Meets AHRI-700 Standards Order Today!! --- It Does Not Contribute To Ozone Depletion and is therefore becoming more widely used. --- We Have It Manufactured Here In The U.S.A Under Our Name Brand, Frosty-Freeze Refrigerants, SINCE 1979. --- Factory Sealed Refrigerant can with 5 lbs. of refrigerant R410a. --- --- Proseal XL4 Direct Inject 1.5-5 Ton Applications #2100A1-5 One of our most requested products! Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. Enviro-Safe™ has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. Unlike most other products on the market, ProSeal XL4 with Dye travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 with Dye Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. Eliminate the tedious, and time consuming process of "pumping down the unit". Simply Connect and Inject. Enviro-Safe's ProSeal XL4 Inject is: --- Concentrated --- Compatible with all refrigerant, except ammonia --- Compatible with all oils --- No need to pump down R410, or other units --- Large equipment, bulky tools, injection hoses are a thing of the past For Use In: --- heat pumps --- split systems & mini split units --- packaged units --- microchannel coils --- EASY SEAL PRO DRY XL4 Auto Direct Inject A/C Dehydration & Moisture Treatment --- ProDRY XL4 Inject Part# 2105AI --- Enviro-Safe&; ProDry Xl4 Inject is the very first A/C Dehydration Treatment in a direct inject device, and is the concentrated version of our 4 oz ProDry XL4 can. --- ProDry XL4 Inject’s formula contains a dehydrating agent that converts the moisture in the A/C system into a synthetic oil that mixes with the oil already in the system. --- Features and Benefits --- •Eliminates moisture to protect the system from failure resulting from corrosion. --- Moisture robs a system of cooling capacity. --- •Less expensive than removing moisture through mechanical evacuation --- • Easy to install --- ProDry XL4 Inject works best in heat pumps, split and mini- split units, packaged units, micro channel coils, coolers, and commercial units. --- *DO NOT use in ammonia systems. --- Features and Benefits:Pro --- ProDry XL4 Inject is the concentrated version of Enviro-Safe ProDry XL4. --- ProDry XL4 Inject's formula contains a dehydrating agent that converts the moisture and air in the a/c system into a synthetic oil that mixes with the oil already in the system. --- Eliminates moisture to protect the system from failure, resulting from corrosion. Moisture robs a system of cooling capacity --- Treats systems up to 5 Tons --- Less expensive than removing moisture through mechanical evacuation --- Sealing leaks will save energy, AND lowers refrigerant emissions --- Install Enviro-Safe Pro-Seal XL4 Inject after installing Enviro-Safe ProDry XL4 Inject --- If the system has not leaked all the way to zero, moisture and air should not be in the system. However, when in doubt use ProDry XL4 Inject.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R410a, Refrigerant, 5 lb. Hose, Pro-Seal Pro-Dry XL4 Leak Stop, Free Ship, Kit K
New!
Kit K
*Includes a MALCO pocket screwdriver that has a regular flat blade and a valve core tool
built
into the handle.
It also has a pocket clip.
Refrigerant R-410a
Top off your system with this 5 Lb. disposable can of R-410a refrigerant.
Recharging your system is super easy with this nice
convenient
5 Lb. can.
(1) CPS AD87 R410a Low-Side 5/16 Adapter
Great for new installs , Mini Split Systems, Heat Pump Systems or any other equipment usuing R410a Refrigerant.
This is what you get:
One 5 Liquid Lbs. of R410a with a 1/4" Male Flare Hose Connection.
The tank does have a on/off valve as well.
Frosty-Freeze Refrigerants, Since 1979
5 Pounds of R410a Refrigerant.
LOWEST PRICE ON EBAY!!!
Perfect for Mini-Split (Ductless) Systems & Topping Off Your Unit Without Spending A Lot Of Money.
R-410A is currently the leading HFC Refrigerant.
Meets AHRI-700 Standards
Order Today!!
It Does Not Contribute To Ozone Depletion and is therefore becoming more widely used.
We Have It Manufactured Here In The U.S.A Under Our Name Brand, Frosty-Freeze
Refrigerants
, SINCE 1979.
Factory Sealed Refrigerant can with 5 lbs. of refrigerant R410a.
Proseal XL4 Direct Inject 1.5-5 Ton Applications #2100A1-5
One of our most requested products!
Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years.
Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 with Dye travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 with Dye Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets.
Sealing leaks will save energy and lower refrigerant emissions.
Eliminate the tedious, and time consuming process of "pumping down the unit".
Simply Connect and Inject.
Enviro-Safe's ProSeal XL4 Inject is:
Concentrated
Compatible with all refrigerant, except ammonia
Compatible with all oils
No need to pump down R410, or other units
Large equipment, bulky tools, injection hoses are a thing of the past
For Use In:
heat pumps
split systems & mini split units
packaged units
microchannel coils
EASY SEAL PRO DRY XL4 Auto Direct Inject A/C Dehydration & Moisture Treatment
ProDRY XL4 Inject Part# 2105AI
Enviro-Safe&; ProDry Xl4 Inject is the very first A/C Dehydration Treatment in a direct inject device, and is the concentrated version of our 4 oz ProDry XL4 can.
ProDry XL4 Inject’s formula contains a dehydrating agent that converts the moisture in the A/C system into a synthetic oil that mixes with the oil already in the system.
Features and Benefits
•Eliminates moisture to protect the system from failure resulting from corrosion.
Moisture robs a system of cooling capacity.
•Less expensive than removing moisture through mechanical evacuation
• Easy to install
ProDry XL4 Inject works best in heat pumps, split and mini- split units, packaged units, micro channel coils, coolers, and commercial units.
*DO NOT use in ammonia systems.
Features and Benefits:Pro
ProDry XL4 Inject is the concentrated version of Enviro-Safe ProDry XL4.
ProDry XL4 Inject's formula contains a dehydrating agent that converts the moisture and air in the a/c system into a synthetic oil that mixes with the oil already in the system.
Eliminates moisture to protect the system from failure, resulting from corrosion. Moisture robs a system of cooling capacity
Treats systems up to 5 Tons
Less expensive than removing moisture through mechanical evacuation
Sealing leaks will save energy, AND lowers refrigerant emissions
Install Enviro-Safe Pro-Seal XL4 Inject after installing Enviro-Safe ProDry XL4 Inject
If the system has not leaked all the way to zero, moisture and air should not be in the system. However, when in doubt use ProDry XL4 Inject.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
New!
Kit K
*Includes a MALCO pocket screwdriver that has a regular flat blade and a valve core tool
built
into the handle.
It also has a pocket clip.
Refrigerant R-410a
Top off your system with this 5 Lb. disposable can of R-410a refrigerant.
Recharging your system is super easy with this nice
convenient
5 Lb. can.
(1) CPS AD87 R410a Low-Side 5/16 Adapter
Great for new installs , Mini Split Systems, Heat Pump Systems or any other equipment usuing R410a Refrigerant.
This is what you get:
One 5 Liquid Lbs. of R410a with a 1/4" Male Flare Hose Connection.
The tank does have a on/off valve as well.
Frosty-Freeze Refrigerants, Since 1979
5 Pounds of R410a Refrigerant.
LOWEST PRICE ON EBAY!!!
Perfect for Mini-Split (Ductless) Systems & Topping Off Your Unit Without Spending A Lot Of Money.
R-410A is currently the leading HFC Refrigerant.
Meets AHRI-700 Standards
Order Today!!
It Does Not Contribute To Ozone Depletion and is therefore becoming more widely used.
We Have It Manufactured Here In The U.S.A Under Our Name Brand, Frosty-Freeze
Refrigerants
, SINCE 1979.
Factory Sealed Refrigerant can with 5 lbs. of refrigerant R410a.
Proseal XL4 Direct Inject 1.5-5 Ton Applications #2100A1-5
One of our most requested products!
Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant.
ProSeal XL4 Inject is compatible with all refrigerants except ammonia.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years.
Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 with Dye travels with the gas, which makes it faster, and more effective at finding leaks.
ProSeal XL4 with Dye Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets.
Sealing leaks will save energy and lower refrigerant emissions.
Eliminate the tedious, and time consuming process of "pumping down the unit".
Simply Connect and Inject.
Enviro-Safe's ProSeal XL4 Inject is:
Concentrated
Compatible with all refrigerant, except ammonia
Compatible with all oils
No need to pump down R410, or other units
Large equipment, bulky tools, injection hoses are a thing of the past
For Use In:
heat pumps
split systems & mini split units
packaged units
microchannel coils
EASY SEAL PRO DRY XL4 Auto Direct Inject A/C Dehydration & Moisture Treatment
ProDRY XL4 Inject Part# 2105AI
Enviro-Safe&; ProDry Xl4 Inject is the very first A/C Dehydration Treatment in a direct inject device, and is the concentrated version of our 4 oz ProDry XL4 can.
ProDry XL4 Inject’s formula contains a dehydrating agent that converts the moisture in the A/C system into a synthetic oil that mixes with the oil already in the system.
Features and Benefits
•Eliminates moisture to protect the system from failure resulting from corrosion.
Moisture robs a system of cooling capacity.
•Less expensive than removing moisture through mechanical evacuation
• Easy to install
ProDry XL4 Inject works best in heat pumps, split and mini- split units, packaged units, micro channel coils, coolers, and commercial units.
*DO NOT use in ammonia systems.
Features and Benefits:Pro
ProDry XL4 Inject is the concentrated version of Enviro-Safe ProDry XL4.
ProDry XL4 Inject's formula contains a dehydrating agent that converts the moisture and air in the a/c system into a synthetic oil that mixes with the oil already in the system.
Eliminates moisture to protect the system from failure, resulting from corrosion. Moisture robs a system of cooling capacity
Treats systems up to 5 Tons
Less expensive than removing moisture through mechanical evacuation
Sealing leaks will save energy, AND lowers refrigerant emissions
Install Enviro-Safe Pro-Seal XL4 Inject after installing Enviro-Safe ProDry XL4 Inject
If the system has not leaked all the way to zero, moisture and air should not be in the system. However, when in doubt use ProDry XL4 Inject.